Pandora Light Скачать руководство пользователя

Страница: 1 / 52

Pandora would like to thank you for

choosing our service-security system

Pandora Light – is a car service-security system built for cars with on-board voltage of 12V. It

is a complex engineering solution, which includes unique and modern technological software and

hardware solutions.

When building the Pandora Light we were using the most up-to-date electronics from world’s

best manufacturers. The device is built using high-precision mounting and control machinery, thus

we guarantee highest possible quality, reliability and stable technical characteristics for the whole

operation period.

Pandora Light has a cryptographically strong authorization code with unique dialog algorithm

and individual 128 bit encryption key on every device. We guarantee 100% protection form electronic

hacking for the whole operation period.

The system is built for your convenience: it’s ergonomic, reliable, has the highest security and

service characteristics, 3 years unconditional warranty and free service and support on the territory

of Russian Federation and nearest states. We are happy to provide any support we can – feel free to

use our online support.

WARNING! It is strongly advised to have professional car mechanic installing the system.

Any car electronics installer should be able to install Pandora Light using installation

scheme in this manual and Alarm Studio software. Most features are highly dependent

on competent installation. Our systems are thoroughly tested for quality, so if a feature fails to

produce expected result, most likely the problem is in improper installation.

This device has limited external factors resistance. It should not be subjected to water beyond occasional splatter, or operated in

temperatures outside -40 to +80° C range. All system components must be installed only in a car interior.

Our web site: www.pandorainfo.com

Customer support: [email protected]

Product is in conformity with Electromagnetic Compatibility

Directive EMC 2004/108/EC and R&TTE Directive 1999/5/EC

Содержание Light





















































Результаты поиска

Содержание Light

Отзывы:

Похожие инструкции для Light

Бренды по названию

Популярные бренды

Pandora Light, Руководство пользователя

Результаты поиска

Содержание Light

Отзывы:

Похожие инструкции для Light

Бренды по названию

Популярные бренды