2. Hold over a bin, carefully remove the dust filter and empty.
3. Tap the dust filter gently.
4. Occasionally wash the dust filter under cold running water.
CAUTION: Do not wash the dust filter in the washing machine.
5. Leave the dust filter to air dry for 24 hours until completely dry
before reinserting.
CAUTION: Do not use a hair dryer.
6. Press firmly back in so it fits tightly in the dust compartment
housing.
CAUTION: Never use the vacuum cleaner without the dust filter inserted.
7. Press the unlocking button to engage. The dust cup must be securely
engaged at the top and bottom of the appliance for it to work properly.
Cleaning and replacing motor protection filter
Once you have removed the dust cup, you will find a piece of non-
woven material on the open side of the appliance. This is the motor
protection filter. It needs to be cleaned from time to time.
1. Remove from the appliance, shake and tap off the dust.
2. Rinse with lukewarm water.
3. Shake again and leave to dry off completely.
Cleaning housing
Clean the housing with a slightly damp, soft cloth if
necessary.
Storage
• The power cord can be wrapped around the rod handle is fitted.
• To unwind next use, twist the cord holder down on the top handle.
• The vacuum cleaner should be stored indoors in a cool, dry place.
Troubleshooting
IMPORTANT: If you are experiencing any issue with the appliance whatsoever,
first inspect the filters and all parts of the brush head carefully and ensure there
is no buildup of dust or dirt.
This is the most common cause of vacuum cleaner faults and problems,
including powering on and suction strength.
If you experience any issues, contact Kogan Support.
User manual is subject to change without notice. For the latest version of your user manual,
please visit
https://www.kogan.com/usermanuals/
4
