Fitting and removing nozzles
CAUTION: Always switch off the vacuum cleaner before changing nozzles.
• To fit nozzles, insert in the suction opening.
• To remove nozzles, pull out of the suction opening.
Floor Nozzle Attachment
The floor nozzle attachment is suitable for both carpets and
smooth floors.
Crevice Accessory
The crevice accessory is designed for upholstery, cleaning the
interior of cars and for getting into all corners and cracks that
are inaccessible with the floor nozzle attachment or without a
nozzle.
CAUTION: Never hold the crevice nozzle close to the body or it may stick to the
skin, and cause injury.
If the nozzle does get stuck, set the switch off immediately.
Operation
• Ensure all parts are fully assembled and filters correctly inserted before use.
• Do not use the appliance on the following:
– liquids or wet materials (e. g. carpet shampoo when wet)
– ash, cigarette ends, matches, etc.
– combustible or in flammable substances
– very fine dust (e. g. concrete dust) or toner
– hard, pointed objects such as large splinters of glass
1. Fit or remove the rod handle according to desired use.
2. To quickly unwind the cable from the floor vacuum cleaner,
twist down the cord holder on the top handle.
3. Insert the power plug in a wall outlet and turn on.
4. Begin cleaning
5. After use, switch off and unplug.
6. After use, always empty the dust compartment and clean the
dust filter.
Cleaning and Care
• Remove the power plug before cleaning and/or putting away.
• Do not use caustic or abrasive products or you may damage the surface.
• Never immerse the appliance in water.
Emptying and cleaning the dust container
1. Hold down the unlock button for the dust compartment and
carefully remove.
3
