37
1. KSR816 Guide
7. System Setup
S
yst
em
S
e
tup
36
1. KSR816 Guide
7. System Setup
S
yst
em
S
e
tup
7. System Setup
7.1 Accessing Setup mode
[Figure 7-1. Password screen]
[Figure 7-2. Setup menu]
To access Setup mode, press Setup button on the system. You will then be asked to enter
password as shown below:
After you enter the correct password the Setup menu will appear as shown. You can select
different options using the mouse or the directional keys.
�
Use the number keys to enter the correct 4-
digit password, then press
Enter
(The
system has no password under factory
settings).
�
If you forget your password, you will not be
able to access Setup mode, or change your
password. We strongly recommend that
you either write down your password and
keep it safe or use a password that you are
sure to remember.
�
See page 38 for instructions on how to
change password.
�
To return to Surveillance mode, press
MENU
button again.
�
You can change various system functions in
Setup Mode to customize the system’s
recording settings.
�
See page 37, Table 7-1 for brief outline of the
settings you can change.
�
To return to Surveillance mode, press Menu
button or click right mouse button.
7.2 Setup menu
Main Menu
Setting Options
Description
Password
Change and set system password.
Site Information
Change site code, date display type, and time.
�System
Software Upgrade
Update system program
Setup
Log Information
Show recorded log information
OSD/Dwell Time
Turn OSD on/off, and set automatic channel rotation setting
System management
Change system hardware settings
System Shutdown
Shutdown or restart the system
Recording setup
Set brightness, frame rate, and audio recording.
�Recording
Motion Detection
Set motion detection area and beep sound of each camera.
Setup
Recording Schedule
Select recording mode and set camera schedule.
Quality / Resolution
Set the recording channel size and resolution.
Camera Name
Change camera name.
�Camera
P/T/Z Model
Select Pan/Tilt camera model.l
Sensor Setting
Set sensor connection to the system.
Setup
Sensor/Control link
Change sensor and control connection and options.
Spot Out/Camera lnk
Set the camera whose data are to be outputted on the spot
monitor.
Network
Select network type.
ID/PASSWORD
Logging in ADSL require ID/PASSWORD.
Site IP
Enter IP address of the system.
�Communication Subnet Mask
Enter subnet mask address of the system.
Setup
Gateway
Enter gateway address of the system.
Emergency Notification
Transmit video data to a remote location or an e-mail address in
case of emergency.
�Backup Setup
Backup Schedule
Setup automatic backup schedule
[Table 7-1. Setup menu options]
