10
Pump Oil Change
NOTE:
Check the pump before every use as well
as the system components. Check Pump oil level
daily. The pump of the pressure washer will
require an oil change once a season or after the
first 50 hours operation and then every 50 hours
after that. Use only SAE30 non-detergent oil
in the pump. The pump also contains an oil sight
glass and a dipstick.
Basic Maintenance
– continued
Water Screen
CAUTION:
If the screen is not kept clean, the
flow of water to the pressure washer will be
restricted and the pump may be damaged.
The pressure washer is equipped with a water
inlet screen to protect the pump. Clogging of the
water screen will restrict flow of water. Cleaning
is immediately required with unit turned OFF.
1. Disconnect the garden hose from the INLET.
2. Remove the water screen from the INLET.
3. Clean screen under warm water.
4. Replace screen immediately to prevent any
foreign matter from entering the pump.
5. Reconnect the garden hose to the INLET.
CAUTION:
Do not damage the screen while
removing or cleaning. Any foreign particles
entering the pump will damage the unit.
Engine
To ensure proper care of the engine, be sure to
follow the manufacturer's maintenance schedule,
routine inspection procedures, and maintenance
procedures.
Please refer to the Honda Engine Owner's Manual
for details on maintenance of the engine.
WARNING:
Improperly maintaining the engine,
or failure to correct a problem before operation,
can cause a malfunction in which you can be
seriously hurt or killed.
NOTE:
In the unlikely event that you have a
problem with the engine, you must contact a
Honda Service Centre. Please call the Honda
toll-free hotline at
1-888-946-6329
to locate the
nearest Authorized Service Centre.
Step 4.
Remove the yellow oil fill plug from pump.
Step 5.
Add oil (SAE30 non-detergent motor oil)
until the oil level is halfway up the oil sight
glass.
Step 6.
Replace yellow oil fill plug securely.
Step 1.
Use a socket wrench to remove the drain
plug, located on the side of the pump.
Step 2.
Drain the oil into a suitable container.
Please dispose of oil properly.
Step 3.
Replace the oil drain plug securely.
