background image

7

Cleanup Instructions

Step 1

  Insert detergent suction tube into a clean  

 

container (not supplied) with one gallon 

 

(4 L) of fresh water.

Step 2 

Pull back the collar on the spray lance

 

to insert detergent nozzle (see page 6).

Working with Detergent

Detergent Overview

To enhance the efficiency of the pressure washer, 
sometimes it is necessary to use detergents to 
help loosen tough dirt and grime.

 CAUTION: 

This machine has been designed for 

  use with pressure washer detergents only. The 
  use of other detergents or chemicals may affect 
  the operation of the machine and will void the 
 warranty. 

 NOTE: 

To apply detergent, the black-coloured

  detergent nozzle must be used to activate the
  low-pressure detergent injection system.

 WARNING!

• Never use bleach, chlorine products and 
  other corrosive chemicals
• Never use liquids containing solvents 
  (i.e., paint thinners, gasoline, oils)
• Never use tri-sodium phosphate products
• Never use ammonia products
• Never use acid-based products

These products can cause physical injuries 
to the operator and irreversible damage to 
the machine and/or damage the surface 
being cleaned.

Detergent Application

Step 1 

Place suction hose into a container

 

of pressure washer detergent.

Step 2 

Pull back the collar on the spray lance

 

to insert detergent nozzle (see page 6).

Step 3

  Turn adjustable knob counter-clockwise

 

to open the detergent suction tube.

Step 4

  With the engine running, depress the 

 

gun trigger to apply detergent to the work 

 

area; DO NOT allow detergent to dry 

 on 

surface.

Step 5

  After applying detergent, turn adjustable

 

knob clockwise to close off the detergent

 suction 

tube.

Step 6

  Release the gun trigger and attach one

 

of the high-pressure nozzles to rinse.

 IMPORTANT: 

When you have finished using 

  detergent, always follow the Cleanup Instructions. 
  Failure to clean properly will cause the injection 
  system to become clogged and inoperable.

Step 3

  Turn adjustable knob counter-clockwise

 

to open the detergent suction tube.

Step 4

  With the engine running, press and hold 

 

the gun trigger for one minute or until the 

 

container of fresh water is empty.

Step 5

  After siphoning the water, turn adjustable

 

knob clockwise to close off the detergent

 suction 

tube.

Step 6

  Release the gun trigger and attach one

 

of the high-pressure nozzles.

Содержание CKC3200GPC
















Отзывы: