background image

6

Using the Accessories 

 CAUTION: 

Your pressure washer operates at fluid pressures and velocities high enough to cause 

  property damage. Before cleaning any surface, choose an inconspicuous area to test spray pattern 
  and distance for maximum cleaning results. If painted surfaces are peeling or chipping, use extreme 
  caution as pressure washer may remove the loose paint from the surface.

Quick-Connect Nozzles

Four colour-coded quick-connect nozzles are
included with the pressure washer:

Red:

 

This nozzle produces a high-pressure

 

pencil-point spray (0˚) ideal for removing

 stubborn 

dirt.

Yellow:

  This nozzle produces a high-pressure

 

flat spray (15˚) suitable for cleaning

 

large surface areas.

Green:

  This nozzle produces a high-pressure

 

flat spray (25˚) suitable for cleaning

 

larger surface areas.

Black:

  This nozzle produces a low-pressure

 

spray that must be used for application

 of 

detergents.

 CAUTION: 

The pencil-point spray (0˚) is very

  aggressive. For most cleaning applications, the
  flat spray nozzles (15˚ and 25˚) should be used
  to avoid damage to the surface being sprayed. 

 NOTE: 

The intensity of the spray increases as 

  you move the lance closer to the surface.

 Step 1.

 Discharge residual pressure by pressing 

 

 and holding the gun trigger until no water

 

 comes out of the nozzle.

Changing Nozzles

 

CAUTION: 

When installing or changing a spray

  nozzle, always do so with the water turned OFF
  at the source and the engine turned OFF.

 Step 2.

 Release the gun trigger and engage the

  

gun 

safety-lock.

 Step 3.

 Pull back the collar on the lance socket

 

 to insert a nozzle.

 Step 4.

 Release the collar and pull sharply on

 

 the connection to ensure connection is

  

secure.

 CAUTION: 

When inserting or taking out the 

  spray nozzles from the rubber grommet (located
  on the handle) use a twisting action so that the
  rubber grommet does not disengage from the
 grommet hole.

Your dealer carries a complete line of 
accessories that compliments your pressure
washer and maximizes its usage. Here are just
a few of the accessories that are offered:

 • Liquid detergents
 • Rotary nozzles
  •  Wet sandblast nozzles

Содержание CKC3200GPC
















Отзывы: