Koden MDS-1100R Series, Руководство по установке

Страница: 27 / 70

MDS-1100R Series Chapter 3 Installation
0092642260-01 3-3
3.3.1 Installation of the RB804/805 Radome Antenna
Referring to the illustration below, make five (5) holes on the cradle and fix the bracket and the antenna
together with hexagon bolts. If the thickness of the bracket is 9 to 14 mm, it can be installed with the
supplied bolts. If not within this range, prepare bolts shown on the table below. To prevent the
looseness from occurring, fortity with the commercially available loose-preventive silicon sealing.
However, for preventing the looseness of the radome antenna, do not use the putty. The putty may
deteriorate chemically the plastic material of the radome.
Specification of bracket thickness-wise installation bolt (In case of RB804)
Thickness of bracket Bolt for fixing the antenna Material Remarks
4 to 11 mm (0.16 to 0.44 in) M10x40 (pitch 1.5mm) stainless Included in accessories
11 to 19mm (0.44 to 0.75 in) M10x45 (pitch 1.5mm) stainless
Drawing of Work for Installation Holes on the Bracket
Install with f our bolts
Bracket
Flat washer
Spring washer
M10 hexagon bolt
Radome (bottom)
Chassis
Accessory
Center
Unit: mm (inch)
For air tube
2kW radome antenna
HDG
Center
For air tube
4kW radome antenna
HDG
140
(0.47)
(0.47)
(0.59)
(5.51)
(8.43)
(2.36)
(2.56)
(1.18)
(1.38)
(5.51)
(6.69)
140
30
60
170
35
65
214
RB804
RB805