Koden MDC-900 Series, Руководство по эксплуатации

Страница: 20 / 83

Chapter 1 Basic Operation MDC-900 Series
1-5 0093142132-05
Number Key name Explanation
(1) [F1]* Recalls directly the preset menu item.
(2) [ENT] * Press: measures bearing of distance between two points.
Continuously
pressing: Deletes the heading line. The crosshair cursor
moves to the own ship’s position.
The value in the menu is set. (Some of functions)
(3) CURSOR
[ ], [ ]
[ ], [ ]
Selects the menu item.
Changes the content of set value.
Moves the crosshair cursor.
(4) [F2] * Recall directly the preset menu item.
(5) [MENU] * Opens or closes the menu.
(6) [- RANGE+] Changes the range setup.
(7) [GAIN] * Rotate: Changes the gain.
Push: Changes the gain adjustment of sub-screen (lower screen of
PPI/PPI) and the range.
In the PPI or PPI/NAV display, recall directly the preset menu
item.
(8) [STC] Rotate: Changes the STC.
Push: Display the video of a CCD camera.When the video of a CCD
camera is displayed, if you press it, the size of video changes.
When not connecting CCD camera, recall directly the preset
menu item.
(9) [STBY/TX] Starts or stops the transmission.
(10) [BRILL]* Push: Adjusts the brilliance and the brightness of the panel.
Continuously
pressing: Turns on or off the power.
* In case of pressing it during the CCD camera on, the display of the CCD camera becomes off.
When the alarm is functioning, the alarm stops by operating any key.