background image

Important Notices 

MDC-900 Series 

 

ii 

0093142132-05 

Important Notices 

 

 

The re-use and transcription of Operation Manual (hereafter called this manual) needs permission 

of our company. Our company prohibits the un-authorized re-use and transcription. 

 

If this manual is lost or damaged, consult our dealer or our company.   

 

The specification of our products and the content in this manual are subject to changed without 

notice. 

 

In the explanation of this manual, the content displayed on the menu of product may be different, 

depending on the situation. The keys and menus in the illustration may differ in physical font and 

shape. And some parts may be omitted. 

 

Our company is not liable for damage and trouble arising from misunderstanding of the content 

described in this manual.   

 

Our company is not liable for earthquake, lightning, fire for which our company is not responsible, 

action by third party, other accident, customer’s unintended error/abuse and damage caused by 

the use under other abnormal condition.   

 

Our company is not liable for damage of accompaniment (change/loss of memorized content, loss 

of business profit, stop of business) arising from use or failure of our product. 

 

If the stored data is changed or lost, irrespective of any cause of trouble and damage, our 

company is not liable for it. 

 

Our company is not liable for any damage arising from malfunction caused by combination of such 

software and connected equipment that did not involve our company. 

 

Содержание MDC-900 Series




















































































Отзывы: