Koden MDC-900 Series, Руководство по эксплуатации, Страница: 25 / 83

MDC-900 Series Chapter 1 Basic Operation
0093142132-05 1-10
crosshair cursor
cursor position
cursor bearing
cursor distance
1.12 Measuring the
distance and bearing
between two points
The distance and bearing between two points,
you desire, can be measured, using the
crosshair cursor.
Measuring the distance and bearing
between two points
1
Move the crosshair cursor to one point
desired with the [ ], [ ], [ ] and [ ] keys.
2
Press the [ENT] key to set it as an origin.
3
When moving the crosshair cursor with the
[ ], [ ], [ ] and [ ] keys, the distance and
bearing from the origin to the position of the
crosshair cursor are displayed.
4
When pressing the [MENU] key, the 2-point
calculation is finished.
origin
crosshair cursor
cursor position
35
°
24.334N
139
°
0.903NM 152.1
°
45.831E
Distance between the origin
and the crosshair cursor
Bearing of the crosshair cursor
when viewed from the origin
1.13 Camera Display
The video of a CCD camera can be displayed on
the radar screen. (CCD camera: Prepared by a
customer)
How to connect a CCD camera
1
Connect CW-405-0.3M cable (optional
cable) to the J7 in the rear connectors.
2
Connect a commercially available CCD
camera to the cable.
How to display the video of a CCD
camera
1
Press the [STC] knob.
The video of a CCD camera appears.
A
split-screen
display and a full screen
display are toggled by pressing the [STC]
knob.
2
When pressing the [ ] or [ ] key in the state
that a video of the CCD camera is displayed,
the display position of the video of the
camera video can be corrected.
3
When displaying the video of the CCD
camera, if a key other than the [STBY/TX]
[ ] and [ ] keys is pressed, the video of the
CCD camera disappears.
When displaying the video of a CCD
camera, the display area of the radar
image is narrowed.
When set to [Full Screen Display], the
radar image is completely concealed.
When displaying the video of a CCD
camera, pay attention to the display
area.
Caution
When installing a CCD camera, orient
it correctly. When correctly installed,
the 90 degree-shifted video of a CCD
camera is displayed. Install a CCD
camera in a correct orientation so that
the video in a correct direction is
displayed.
Caution