MDC-7000P/7900P Series
Chapter 1 Radar Basic Operation
0093169008-00C
1-11
Move the cursor to or and click the
left button
. Then the EBL1 or
EBL2 line changes to display or non-display.
Bearing of the selected EBL can be changed by turning the
mouse wheel
.
Move the cursor to the EBL1 or EBL2 line. Move the mouse while holding the
left button
down and release the
left button
to change the bearing of EBL.
1.13 Measurement of bearing and distance by ERBL
1
Press ERBL key to display ERBL line. The bearing and distance value of ERBL is indicated lower
right of the display.
2
When you press OFF and ENT key simultaneously, ERBL origin move to own ship position.
3
Press ERBL key again. The ERBL line disappears.
1.14 Trail
The trail [TIME] and [REL] or [TRUE] mode can be changed directly on the lower left of the display, with
cursor and ENT key.
Trail ON/OFF and change Trail time
1
Move cursor to the trail time status box.
2
Press ENT key to change trail time.
Bearing mode
Bearing
Distance
Содержание MDC-7000P series
Страница 1: ......
Страница 2: ......
Страница 6: ... This page intentionally left blank ...
Страница 26: ......