Koden MDC-7000P series, Быстрая справка

Страница: 20 / 26

Chapter 2 Target (AIS and TT) MDC-7000P/7900P Series
0093169008-00C 2-2
2.3 Set Input range
Input range menu designates the entire operation range of AIS and TT. So, AIS and TT do not function
outside of the range.
1
Press MENU key to display “Menu”.
2
[TARGET] => [INPUT RNG] => and press ENT key after selecting the setup value.
Selection values: 1.0NM to 64.0NM
2.4 Set AIS filter
It is possible to hide unnecessary sleeping targets or to display the necessary targets only by setting
AIS FILTER.
1
Move cursor to the AIS filter status, and press ENT key. [AIS FILTER] menu will be shown.
Press MENU key to close the menu after setting value. AIS filter is indicated in target status
window at right of the display.
FILTER
AB
○
The filter is absolutely used to limit display.
When input data is to be limited, [TARGET] =>
[INPUT RNG] shall be operated.