background image

MDC-7000P/7900P Series

 

Chapter 3 Other Setting 

 

0093169008-00C 

3-3

     

ALARM stop (

Acknowledged

 

In case of malfunction, the alarm sound and display appear on the lower right of the 

display.  

Record the alarm detail and move the cursor to the alarm display area on the lower right 

corner of display. Click the 

left button

, and the alarm sound and display will disappear. 

MENU operation 

 

Move the cursor to MENU

   

  on the right side of the display and click the 

left button

“MENU” is displayed on the right side of the display. 

Move the mouse to select the menu item. 

Click the 

left button

 to go to the following “MENU”. 

Click the 

right button

 to return to the previous “MENU”. 

Long press the 

left button

 to confirm a setting value. 

Click the 

right button

 while holding the 

left button

 down to close “MENU”.   

     

MOUSE movement speed 

 

The tracking speed of the mouse pointer can be set by the following menu. 

[MAINTENANCE] => [STARTUP] => [MOUSE SPEED] 

Setting Value

FAST, MEDIUM, SLOW 

3.4 

USB Mouse/Trackball Basic Operation 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание MDC-7000P series



























Отзывы: