MDC-2900 Series
Chapter 3 Setup after installation
0092629012-07
3-19
3.6 Backup of set values
The set values of radar functions can be stored internally and externally to retrieve them. All
changes after delivery from plant such as menu settings, screen setting and mapping input data
can be recorded.
3.6.1 Internal storage
Internal storage should be performed after setting of installation. When recovery to the original
status after operation of various functions is not easy, it is possible to recover the original status
after retrieving the internally stored data.
Internal storage method of data:
Press [MENU] key and follow [MAINTENANCE] => [BACKUP] => [SETUP SAVE] => [GO] and
press [ENT] key.
Retrieval method of internally stored data:
Press [MENU] key and follow [MAINTENANCE] => [BACKUP] => [SETUP LOAD] => [GO] and
press [ENT] key.
3.6.2 External storage
As external storage does not have influence of initialization, this can be used for replacement of
PCB and devices.
External storages shall be PCs that can be equipped with serial communication (with serial port or
with USB-serial conversion cable).
The PC needs to be provided with dedicated software (MDC-2XXX.exe).
Connection between a PC and this device shall be done with a dedicated cable (CW-395). Port J4
on this device for navigation equipment (NAV) shall be used. It shall be confirmed that the COM
port connected to PC and the COM port of the channel displayed when MDC-2XXX.exe is
activated are matched.
After confirming that the external storage PC has been activated to be reservable for the set
values or readable (MDC-2XXX.exe is activated), follow the below:
To store the stings in externally:
Press [MENU] key and follow [MAINTENANCE] => [BACKUP] => [EXT SAVE] => [GO] and fix
with [ENT] key.
To read settings from external storage:
Press [MENU] key and follow [MAINTENANCE] => [BACKUP] => [EXT LOAD] => [GO] and fix
with [ENT] key.
