Chapter 3 Setup after installation
MDC-2900 Series
3-4
0092629012-07
3.1.7 Function key usage
For quick function access, this radar is provided with six dedicated function keys (“F1”, “F2”, “F3” , “F4” ,
“F5” , “F6”). You can switch to a prespecified function by pushing each key.
The function key has been assigned as follows at delivery from factory settings:
F1: VECTOR TIME
F2: VECT T/REL
F3: MAP DISP
F4: TRAIL TIME
F5: TRAIL T/REL
F6: AIS
Table 3.1 Table of function that can be selected.
>RADAR-ALARM >OS/TGT-TOOL
>MAP-SYSTEM
>SHORT
CUT
STAB VECT
T/REL
MAP
DISP
PROCESS VECT
TIME
CHART
ENH
TGT ID DISP
DEPTH
IR
PAST POSN T/REL
COAST CURSOR
VIDEO PAST
POSN
TIME
NAVLINE
CURSOR
TRAIL T/REL
AUTO ACQ AREA ON/OFF
ROUTE CURSOR
TRAIL TIME
AUTO ACQ AREA EDIT
EVENT CURSOR
TRAIL RESET
OS PAST TRK TIME
AREA CURSOR
TM RESET
OS PAST TRK RESET
MAP DELETE
C UP RESET
OS OUTLINE
EVENT OWN
HOLD AIS
TTL
OUT
ZOOM TT
DELETE
TIME
FERRY MODE
TT ALL DELETE
ASSISTANT DISP
ECHO ALARM ON/OFF
TT REF ACQ
TGT LIST SORT
ECHO ALARM EDIT
RR
GZ ALARM ON/OFF
BRG T/REL
GZ ALARM EDIT
PERFORMANCE
1
Press [MENU] key to display “Menu”.
Select [MAINTENANCE] => [STARTUP] => [F1], and then press [ENT] key after selection.
*No numerical value is displayed in function key operation.
2
The same procedure as step 1 is applied for [F2], [F3], [F4], [F5], [F6], by selecting each item
and pressing the [ENT] key.
[SHORT CUT]: This function makes it easy to access a menu item that was previously set up by
pressing the F key once.
1
Select F key to be assigned as short cut key (for example [F1] key).
2
Move to the menu that you want to assign for short cut function.
3
Push a [F1] key by holding a [OFF] key.
4
The setup is complete when beeping the buzzer for 2 second.
5
Push [F1] key without menu, and then assigned short cut menu will appear immediately.
