Koden MDC-2900, Руководство по эксплуатации

Страница: 81 / 191

Chapter 3 Primary operations (Menu) MDC-2900 Series
3-22 0093129012-06
AUTO ACQ AREA: Automatic acquisition area
If an un-tracked TT (ARPA) target enters this area, then the automatic acquisition starts.
If an AIS sleep target enters there, then it is automatically changed into an active target.
If a TT (ARPA) tracked target or an AIS active target enters there, then no response occurs.
It takes at least 20 seconds to judge whether the target is acquirable by TT (ARPA).
Take note that the target may not be acquired when the setting area is too narro
w or target is moving on high speed.
1
Press [MENU] key to display “Menu”.
Select [OS/TGT] => [AUTO ACQ AREA], => [EDIT], and then press [ENT] key.
MAP
TRIAL MANOEUVRE
2
Setup area.
Refer to “ Echo alarm ” (page3-13) to set item and setting method.
3
Select [AUTO ACQ AREA], => [ON], and then press [ENT] key.