Koden KSD-1100 Скачать руководство пользователя страница 92

Страница: 92 / 98

Chapter 2 Operation and Setting

KSD-1100/1210

0093107081-00

2-64

2.22.3.3 Alarm Information Management

Manage the historical alarm records of the camera, including alarm time, alarm camera name, alarm

type, etc. At the same time, you can select the alarm information to delete and other operations.

2.22.3.4 Video Monitoring Setting

[1] Camera Setting

Camera screen: The camera screen display switch is turned on by default. If it is turned off, the video

screen of the connected camera will not be displayed.

Camera List: Used to display and set the receiving switch of camera screen and the connection status

of all cameras.

[2] Record Setting

When the automatic video mode is turned on, the system will automatically save the full-time recording.

When the automatic video mode is turned off, the user can set the time record as needed. The start

time and end time of the video camera can be set.

Содержание KSD-1100



































































































Результаты поиска

Содержание KSD-1100

Отзывы:

Koden KSD-1100, Руководство по эксплуатации, Страница: 92 / 98

Результаты поиска

Содержание KSD-1100

Отзывы: