Koden KSD-1100 Скачать руководство пользователя страница 34

Страница: 34 / 98

Chapter 2 Operation and Setting

KSD-1100/1210

0093107081-00

2-6

2.2.2 WIFI

You can set the wireless LAN on/off. When it is set to on, select the wireless network you want to

connect. And enter the password according to the prompt to connect and use. If the network to be

connected is not displayed in the list, you can select [Add network] and enter the network name to add

a network.

2.2.3 Bluetooth

Bluetooth on/off can be set. When it is set to on, search for nearby Bluetooth devices. Tap the Bluetooth

device to be connected for pairing to prompt the Bluetooth pairing request. When the pairing device

and pairing code are displayed, tap pairing and the other party's consent is required to connect and pair

success.

2.2.4 Ethernet

Ethernet on/off can be set. When it is set to on, the IP address, netmask, gateway, and DNS

information will be displayed after connecting to the network. Set the Ethernet mode [dhcp] or [static].

Select [dhcp] to automatically obtain the IP address, gateway, netmask, and DNS. Select [static] to

manually fill in the IP address, netmask, Gateway, and DNS.

2.2.5 Software update

Click [Software update] to view the version information of equipment system, chart, input method,

calendar, main application and AIS version, and be supported online and local SD card upgrade.

2.2.5.1 Online Upgrade

Connect to the network, click to check if there is a new version and detect the new version.

Click to start the update to pop up the upgrade menu. Select [Update Now

→

Start Download

→

Download Complete

→

Prompt New version is ready now, do you want to update right now

→

Install

now

→

After the installation is complete], the device will automatically reboot. Check that the version

has been updated to the latest version, as shown in the figure below.

Содержание KSD-1100



































































































Результаты поиска

Содержание KSD-1100

Отзывы:

Koden KSD-1100, Руководство по эксплуатации, Страница: 34 / 98

Результаты поиска

Содержание KSD-1100

Отзывы: