Koden KSD-1100, Руководство по эксплуатации, Страница: 67 / 98

KSD-1100/1210 Chapter 2 Operation and Setting
0093107081-00 2-39
alarm switch to reset the alarm circle.
(d) Leave alarm: Turn on the leave alarm switch to set the leave alarm circle. Specifically, draw an
alarm circle around the ship. The leave alarm is triggered when the position of a ship in the group
exceeds the circle in the alarm range.
(e) Signal loss: Turn on the signal loss alarm switch, any ship in the group does not receive the AIS
signal and disappears from the chart, triggering the signal loss alarm.
(f) CPA alarm: See the CPA alarm setting in chapter 2.17.2
“AIS Alarm” CPA Alarm.
2.7 Ship Parameters
On the [HOME] page, click [Ship Parameters] to enter the own ship parameters page, including
differential setting, NAVI parameters and static parameters.
2.8 NAVI Data
2.8.1 Navi data list
There are two ways to enter the navigation list. The specific details are as follows.
Method 1: On the [HOME] page, click [NAVI Data] to enter the navigation data list.
Method 2: On the [CHART] page, swipe to the left from the rightmost edge of the screen or press the
[MENU] button. In the pop-up function menu, click [NAVI Data] to enter the navigation data list.
[1] ID Display: Display the number and style of the corresponding navigation data. Click to set the ID to
sort from large to small or from small to large.
[2] Data title: ID, Status ID, Name, Type, Coord / Voyage, Create time, Operation.
(a) Click [Name] to sort by the first letter of the name.
(b) Click [Create time] to sort by creation time.
[9]
[1]
[2]
[4]
[5]
[6]
[7]
[8]
[3]