Koden KGP-922, Руководство по эксплуатации

Страница: 69 / 136

KGP-922 Chapter 4 Setup Procedure
0093130022-00 4-13
Example: The position “S0°00.008 / E0°00.003” is entered by pressing the following keys in exact
order given below.
[ 0 ], [ 0 ], [ 0 ], [ 0 ], [ 0 ], [ 0 ], [ 8 ], [ S ], [ ENT ], [ ]
[ 0 ], [ 0 ], [ 0 ], [ 0 ], [ 0 ], [ 0 ], [ 0 ], [ 3 ], [ E ], [ ENT ]
4.4.2 Disable position correction
To delete and disable the correction offset follow these steps:
(1) Press key until Menu options 1 to 10 appears.
(2) Press
key to select “
5: Compensation
”.
(3) Press
key to select “
1: Latitude / Longitude
”.
(4) Press key to set 0 of offset corrections.
(5) If OK, select [ Yes ] in the pop-up and press key.
If Cancel, select [ No ] in the pop-up and press key.
4.4.3 Compensating the LOP
KGP-922 is converted from Latitude and Longitude to LoranC, LoranA and Decca. It can be corrected
in the converted data. (Caution: Can not convert Decca LOP.)
To change the
“
2: LOP
”
, the following settings are required
You can set of LoranA, LoranC or Decca of
“
2: LOP
”
change when you changed 8: Lop and
9: Chain in the Menu8: Initial setup.
(1) Press key until Menu options 1 to 10 appears.
(2) Press
key to select “
8: Initial setup
”.
(3) Press key to s
elect “
8: Lop
”.
(4) Setting
“LoranA”, “LoranC” or “Decca”
(5) Press key.
(6) Press
key to select “
9: Chain
”.
(7) Select a station you want to measure.
1
MENU
5
CLR
ENT
MENU
ENT
9
ENT
Correction offset
Corrected position
8/S
8/S