Koden KGP-922, Руководство по эксплуатации

Страница: 39 / 136

KGP-922 Chapter 2 Various Navigation
0093130022-00 2-13
(9) If you want to change the [Waypoint]
1) Press key to select of the
Input location of Waypoint
.
2) Enter a waypoint number (0000 to 4999) of the route by numeric keys. (You can check its
memory data on the screen.)
3) Press key to store the waypoint number.
(10) Repeat (8) steps to set another waypoint in the route.
2.4.2 Automatic switching of waypoints
Route navigation can switch the current waypoint in two ways: switching in CIRCLE mode and
switching in BI-SECTOR mode. In CIRCLE mode, the next waypoint is shown when you reach the
proximity alarm circle. In BI-SECTOR mode, the next waypoint is shown when you cross a half-angle
line.
(1) Press key until Menu options 1 to 10 appears.
(2) Press key to select
“
2: Routes
”.
(3) Press key to s
elect “
2: Waypoint change
”.
(4) Press [ ] or [ ] key to locate cursor to select a mode.
(5) Press key. The selected mode will be shown.
2.4.3 Copying a single route
(1) Press key until Menu options 1 to 10 appears.
(2) Press key to select
“
2: Routes
”.
(3) Press key to s
elect “
1: Route Set / Edit
”. Route Input screen is displayed.
(4) Enter a route number (01 to 100) using numeric keys and press key.
(5) Press key to display the pop-up.
(6) Select [ Copy ] in the pop-up and press key.
(7) Enter a source point number (001 to 100) by numeric keys.
(8) Press key to copy the route data.
CIRCLE mode
Proximity
Alarm circle
Waypoint Course line B Course line A
BI-SECTOR mode
Waypoint
Course line A Course line B
When you reach the proximity alarm circle,
the course line is switched from A to B. To
change the proximity alarm range, see
“
Alarms Setting and canceling
” (page
3-3).
When you cross a half-angle line, the
course line is switched from A to B.
ENT
ENT
MENU
2/N
2/N
ENT
2/N
MENU
1
ENT
ENT
ENT
ENT