Kodamo EssenceFM, Руководство пользователя

Страница: 22 / 41

or Exponential mode.
Selected Point Information : On the page bottom line, selected point coordinates are
shown to help you adjusting them.
The currently selected point can be adjusted via hardware controls: the main jog wheel
sets its horizontal position, while INC/DEC keys sets its vertical position.
The Direct Access knobs adjust the horizontal position of the corresponding numbered
points.
Patch mode
In Patch Mode you can organize, play
and edit Patches. This mode responds
to the Global Channel, see Global >
MIDI configuration. When going into
Patch Mode, the first page displayed
is the Patch List.
Like in Voice mode, parameters on
the Patch List page aren’t saved into
any patch (Pitch Bend Range, Volume, Pan…).
“Edit” brings you to the Patch Editor.
“Swap” swaps the current patch with the patch of your choice. Pressing this button will
open a popup that has an “Update related performances” checkbox. It's very important
to keep it checked if the two patches you are swapping are used in a performance. All
performances using them will be modified accordingly and are now in unsaved state (you
need to save them afterwards).
“Clear” clears the current patch.
Patch editor
Layer management
Layer list : All voices layered into the
current patch are listed here. It
allows you to select the layer you
want to work on, whose parameters
are on tabs 1 to 3.
Add Layer (+) : Adds a new layer
21