Random Phase
: Sets the LFO phase to a random starting point when a note is played.
Common Phase
: If checked, all the notes using this voice will share a single instance of
the LFO (all notes will have their LFO in sync).
FILTER TAB:
Dry/Wet Balance
(0 ~ 127): Sets the balance
between dry sound and filtered sound. A value of
64 means you’ve got a 50%-50% mix between dry
and filtered sound.
Resonance
(0 ~ 120): Set the filter resonance.
Beware of loud resonant spikes if you push it to the
maximum.
Cutoff Envelope
: Controls the cutoff evolution over
time. See Envelope Edit section to know more about manipulating envelopes.
MODMATRIX TAB:
Up to 8 modulation cords can be setup for each voice.
“Set Source”, “Set Dest.” and “x” (delete) buttons
apply to the current selected modulation in the list.
Offset
: Applies a positive or negative offset to the
modulation source.
Ratio
: Scales the modulation source.
Set Source
: Selects the source to use (cf. source list
below).
Set Dest.:
Selects the destination parameter to affect (cf. destination list).
Cut cord (x):
Removes the selected modulation line.
I/O value monitor
(at the bottom of the screen): Allows to check, for the selected cord in
the list above, the source value and how the Offset and Ratio amounts are affecting it.
It’s useful to fine tune your Offset/Ratio values according to what you are sending into
the modulation matrix.
16
Содержание EssenceFM
Страница 1: ...English Other languages and PDFs available at kodamo org...
Страница 2: ......
Страница 40: ...Memo 39...
Страница 41: ......