14
Versitec 1- 888 - 722 - 6548 www. versitec.com
This section also provides replacement procedures for the:
•
Gear for Self-Centering Side Guides
– a spacer is installed in
the output tray, which allows the side guides to move independently.
If you want the side guides to move together (self-centering) you
can install the geared spacer that is included with the scanner.
•
Side Guides
– short side guides are standard with the scanner.
A set of tall side guides is included with your scanner and can be
changed as required by your application.
This section provides replacement procedures for the feed
module and the feed module tires.
Replacing the feed module and
feed module tires
Replacing the feed module
To replace the feed module:
1
Open the swing out door.
2
Push the release lever to the right to release the feed module.
