48
A-61818 April 2014
Diagnostics - Debug tab
The Debug tab allows you to turn on options that allow support
personnel to diagnose any issues you may encounter with using your
scanner. It is suggested that you only make changes on this tab when
instructed by Kodak support personnel.
NOTES:
• All of the options on this tab apply to all Setting Shortcuts, not just the
currently selected Setting Shortcut, and are saved immediately.
• In order for any changes on this tab to take effect, you must restart
your application.
Logging
— saves the communications between the scanner and a
scanning application. The options are:
Off
,
On
or
Custom
.
Images
- Received From Scanner
— saves the images received at
the PC from the scanner.
Images - Sent To Application
— saves the images received at the
scanning application from the scanner.
Simulation
— allows you to use the TWAIN Drive/Data source without
using the actual scanner.
•
Model
: allows you to select the specific model to simulate.
•
Flatbed
: allows you to select which flatbed accessory to simulate.
•
Flags
: if supported by your TWAIN Driver/Data source, this will
contain a list of accessories your simulate scanner has installed.