36
A-61818 April 2014
Creating different
settings for each side of
a document, Example 3
In this example, let’s assume you want to configure a two-sided
document stream of business documents that have color on the front of
the document but the back side is fine in black and white.
NOTE: This example is only available for duplex scanners.
1. If you are not already on the Advanced tab:
• Select a
Setting Shortcut
from the main Scanner window that
closely describes your desired output.
• Select
Settings
to display the Image Settings window.
• Select the
Advanced
Image Setup
icon on the Image Settings
window to display the Advanced tab.
2. Select
Input document is: Two Sided
.
3. Turn on the
Different settings per side
option.
4. Select
Images per side: One.
5. Select
Done
to return to the Image Settings window.
NOTE: You will notice that the
Side
option now has two entries:
Front
and
Back
.
6. Select
Side: Front
.
7. Select
Color (24-bit)
for the
Scan as
option on the General tab.
NOTE: Make any other adjustments to the front side settings on
the rest of the tabs on the Image Settings window.
8. Select
Side: Back
.
9. Select
Black and White (1-bit)
for the
Scan as
option on the
General tab.
NOTE: Make any other adjustments to the back side settings on
the rest of the tabs on the Image Settings window.
10. When finished, select
Home
to return to the main Scanner window
and then select
Save
to save your selections to the shortcut.
