Troubleshooting
www.kodak.com/go/support
71
Picture is too light
■
Reposition camera to reduce the amount of available light.
■
Turn flash off (
page 23
).
■
Move so that the distance between you and the subject is
within the effective flash range (
page 23
).
■
To automatically set exposure and focus, press the Shutter
button
halfway and hold
. When the AF/AE indicator turns
green, press the Shutter button
completely down
to take
the picture.
■
Use P mode to adjust the Exposure and Flash Compensations
(
page 22
).
Picture is not clear
■
To automatically set exposure and focus, press the Shutter
button
halfway and hold
. When the AF/AE indicator turns
green, press the Shutter button
completely down
to take
the picture.
■
Clean the lens (
page 83
).
■
Make sure camera is not in Close-up mode if you are more
than 21 in. (0.7 m) from your subject.
■
Place the camera on a flat, steady surface or use a tripod,
especially in high-zoom settings or in low light.
If...
Try one or more of the following
