6
www.kodak.com/go/support
Getting started
Setting the date and time
Setting the date & time, first time
The message
Date and Time have been reset
appears the first time you turn on the
camera or if the battery is removed for an extended time.
1
SET DATE & TIME is highlighted. Press the OK button.
2
Go to step 4 in
Setting the date & time, anytime
.
Setting the date & time, anytime
1
Turn on the camera. Press the Menu button.
2
Move the Joystick
to highlight Setup Menu
, then press the
OK button.
3
Move the Joystick
to highlight Date & Time
, then press the
OK button.
4
Move the Joystick
to adjust the date and time. Move the
Joystick
to advance to the next setting.
5
When finished, press the OK button.
6
Press the Menu button to exit the menu.
NOTE: Depending on your computer operating system, Kodak EasyShare software may update the camera
clock when you connect the camera. See the EasyShare software Help for details.