Kodak DryView 8150, Руководство пользователя

Страница: 52 / 178

2-18 7F3319 October 4, 2004
Operation and Maintenance
Main Menu
You can access most of the Local Panel functions from this menu screen.
To display this screen: Touch
Menu .
1 System Information button . Displays the System Information
Menu screen (see “System Information Menu” on page 2-26 ).
2 Setup Imager button. Displays the Setup Imager screen where
you can enter or adjust parameters such as the Imager network
address, hospital name and image quality parameters. See
“Setup
Imager Screen” on page 2-31 .
This menu choice is used when the Imager is initially installed,
when the configuration parameters must be changed or when
adding a modality.
Most of the setup functions require a Service passcode. (See
“Local
Panel Passcodes” on page 2-57 .)
Refer to Section 4 for setup procedures to add a modality.
Refer to the Kodak DryView 8150 Laser Imager Installation Guide
for the required setup procedures.
3 Current Errors button. Displays the Current Errors screen,
which lists errors detected by the Imager. See “Current Errors
Screen” on page 2-29 . If there are no errors, this button will be
disabled.
3
1
2
6
5
4