Kodak DryView 8150 Скачать руководство пользователя страница 212

Страница: 212 / 470

Service Manual

6-10

7F3318 2005 July Rev. B

6-3-3-2.

DICOM Modality Preferences Database (MPDB)

The MPDB, newly implemented with the 8150 IMAGER, is a repository of “SCP Services” parameters for

all MODALITIES that have been qualified to work with the IMAGER. These parameters are keyed to the

unique DICOM Implementation UID and version name of each MODALITY. These DICOM attributes are

made available to the IMAGER during the establishment of the DICOM association that occurs when the

MODALITY sends an image to the IMAGER. When the association is established, the default ”SCP

Services” parameters that are appropriate to the type of MODALITY are selected and applied from the

MPDB.

As new MODALITIES are qualified, the MPDB can be updated in IMAGERS in the field with the

appropriate parameters for the new MODALITIES.

6-3-4.

MCS Interface Server (MIS)

6-3-4-1.

General

MIS coordinates transfer of rendered image data from the MIM Delivery Interface to the MCS, and

handles all command, diagnostic, and asynchronous event communication between the DRE and MCS.

The MIS is a standalone COM server whose clients include MIM Delivery Interface, the LOCAL PANEL,

the SERVICE TOOL, and the MCS. It includes the following software components: the MCS Image Server

and PCIO Driver, the MCS Command Server, and Service Providers. The MIS in general:

•

Handles all datapath commands from the MIM Delivery Interface, and makes sure that the MIM

Delivery Interface has the correct AIQC information for page rendering.

•

Delivers rendered images through the PCIO BOARD to the MCS.

•

Performs error and activity logging for the MCS, and includes a power on self-test that automatically

runs diagnostics at system startup.

•

Provides the main access point for diagnostics executed through the SERVICE TOOL. It supports a

complete set of calls for the diagnostics available on each subsystem of the MCS.

6-3-4-2.

MCS Image Server

The MCS Image Server, which coordinates all image transfers to the MCS, includes the software driver for

the PCIO BOARD. The MCS Image Server accepts a rendered image from the MIM Delivery Interface,

prepares the PCIO BOARD for DMA transfer of the image, and controls the transfer. Its tasks include:

•

Managing 2 page buffers for rendered images.

•

Initializing a page buffer for DMA transfer to the MCS via the PCIO BOARD.

•

Starting the DMA transfer when commanded by the MIS.

•

Handling status and errors for the PCIO BOARD.

Note

The page buffers managed by the MCS Image Server are located in physical memory in the DRE (in

SDRAM) which is reserved for page buffer use by means of the MAXMEM parameter in the

BOOT.INI file of

Windows

2000. The PCIO Driver maps this physical memory, which cannot be used

Windows

2000 for other purposes, for use as a page buffer. This technique is required to meet

specific data transfer timing requirements of the PCIO BOARD.

Содержание DryView 8150























































































































































































































































































































































































































































































Результаты поиска

Содержание DryView 8150

Отзывы:

Kodak DryView 8150, Руководство по обслуживанию, Страница: 212 / 470

Результаты поиска

Содержание DryView 8150

Отзывы: