Configuring your Camera
May 12, 2004
5-29
Manual
1. Choose Lens Optimization from the Capture menu, then choose
Manual.
2. Press the right side of the Four-way switch to display the edit boxes.
3. Press the right or left side of the Four-way switch to highlight a box.
Press the top or bottom of the Four-way switch to change a value.
NOTE: The strength must be between zero and 99.
4. Press the OK button.
Select a Lens from the User
List
Once you add a lens to the user list (see
page 5-31
) or define a new lens
(see
page 5-35
), you can select it.
1. Choose Lens Optimization from the Capture menu, then choose a lens.
2. Press the OK button.
NOTE: Most long lenses require a correction strength of zero. Select the
>85mm option for these lenses. This is more convenient than
adding all your long lenses to the user list. If you have a long lens
that requires a non zero strength, add it to your user list.
