Kodak AFi 10, Руководство пользователя

Страница: 66 / 230

Note: As the Leaf AF i camera system comes with the imaging module attached to the camera, the imaging
module does not need to be assembled for first time use.
1. Turn the power dial to OFF.
Important: The power dial must be set to OFF when you remove and attach the imaging module.
2. To remove the imaging module, hold the Leaf AF i camera system securely, push the back release spring
switch inward and upward, and gently pull the imaging module away from the camera body.
Note: Use the covers provided to protect the back of the camera and the front of the Leaf AF i imaging
module when the imaging module is detached from the camera body and not in use.
3. If you wish to rotate the imaging module, rotate it 90° counterclockwise.
To rotate the imaging
module display, select
Setup > Shoot View
Options , and set
Auto-Rotation to On .
4. Holding the imaging module parallel to the camera body, align and insert the imaging module pins
into the holes in the back of the camera body.
5. Push the imaging module and camera body together firmly, so that all the pins lock in at the same
time.
You hear a clicking sound as the pins lock.
6. Gently pull the imaging module away from the camera body to check that all the pins are locked. If
only two pins are locked, release the imaging module and re-attach it again.
66
Handling your camera system