Kodak AFi 10, Руководство пользователя

Страница: 197 / 230

Restoring the camera's factory settings
Reset the camera to the factory settings to cancel any settings.
Note: Restoring the camera's factory settings does not affect the settings or configurations that you have
defined in the imaging module.
1. Make sure the camera system is turned off, and push and hold the lens release button.
2. While holding down the lens release button, rotate the power dial to single, multiple, or the red dot.
3. While continuing to hold down the lens release button, push the shutter release button.
The camera turns on, and the handgrip display is blank.
4. When the handgrip display shows LENS UNLOCKED , release the lens release button.
The factory settings are restored.
Restoring the imaging module's factory settings
Reset the imaging module to factory settings.
This task is performed on the Leaf AF i imaging module, in Setup view.
197
Restoring the imaging module's factory settings