background image

A-61602   June 2013

B-1

Appendix B Warranty - US and Canada only 

Congratulations on the purchase of a 

Kodak

 Scanner. 

Kodak

 Scanners are designed to provide end users with the highest 

performance and reliability. All 

Kodak

 Scanners are covered by the following Limited Warranty.

Limited warranty for Kodak Scanners

Eastman Kodak Company provides the following Limited Warranty on 

Kodak

 Scanners (excluding spare parts and 

consumables) distributed by Kodak or through Kodak’s authorized distribution channels:

Kodak warrants that a 

Kodak

 Scanner, from the time of sale through the Limited Warranty period applicable to the Product, will 

be free of defects in materials or workmanship and will conform to the performance specifications applicable for the particular 

Kodak

 Scanner.

All 

Kodak

 Scanners are subject to the Warranty Exclusions described below. A 

Kodak

 Scanner found to be defective or which 

does not conform to the product specifications will be repaired or replaced with new or refurbished product at Kodak’s option.

Purchasers may determine the applicable Limited Warranty period for the 

Kodak

 Scanners purchased by calling (800) 822-

1414, or by visiting www.Kodak.com/go/disupport or by reviewing the Limited Warranty Summary Card enclosed with the 

Kodak

 

Scanner.

Proof of purchase is required to demonstrate eligibility for warranty service.

Warranty exclusions

Kodak’s Limited Warranty does not apply to a 

Kodak

 Scanner that has been subjected to physical damage after purchase, 

caused, for example, by casualty, accident, acts of God or transportation, including (a) by a failure to properly package and ship 
the Scanner back to Kodak for warranty service in accordance with Kodak’s then current Packaging and Shipping Guidelines, 
including failure to replace the shipping restraint prior to shipping, or by a failure to remove the shipping restraint prior to use; (b) 
resulting from the user’s installation, system integration, programming, re-installation of user operating systems or applications 
software, systems engineering, relocation, reconstruction of data, or removal of the product or any component (including 
breakage of a connector, cover, glass, pins, or seal); (c) from service, modification or repair not performed by Kodak or a service 
provider authorized by Kodak or by tampering, use of counterfeit or other non-Kodak components, assemblies, accessories, or 
modules; (d) by misuse, unreasonable handling or maintenance, mistreatment, operator error, failure to provide proper 
supervision or maintenance, including use of cleaning products or other accessories not approved by Kodak or use in 
contravention of recommended procedures or specifications; (e) by environmental conditions (such as excessive heat or other 
unsuitable physical operating environment), corrosion, staining, electrical work external to the product or failure to provide 
electro-static discharge (ESD) protection; (f) by failure to install firmware updates or releases available for the product and (g) by 
such other supplemental exclusions published from time to time online at www.Kodak.com/go/disupport or by calling (800) 822-
1414.

Kodak provides no Limited Warranty for products purchased from countries other than the United States. Purchasers of 
products from foreign distribution channels must seek warranty coverage, if any, through the original source of purchase.

Kodak provides no Limited Warranty for products that are purchased as part of a third party manufacturer’s product, computer 
system or other electronic device.

Any warranty for these products is provided by the OEM (Original Equipment Manufacturer) as part of that manufacturer’s 
product or system.

The replacement product assumes the remainder of the Limited Warranty period applicable to the defective product or thirty 
(30) days, whichever is longer.

Installation Warning and Disclaimer

KODAK WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES RESULTING FROM THE 
SALE, INSTALLATION, USE, SERVICING OR IMPROPER FUNCTIONING OF THIS PRODUCT, REGARDLESS OF THE 
CAUSE. SUCH DAMAGES FOR WHICH KODAK WILL NOT BE RESPONSIBLE, INCLUDE, BUT ARE NOT LIMITED TO, 
LOSS OF REVENUE OR PROFIT, LOSS OF DATA, DOWNTIME COSTS, LOSS OF USE OF THE PRODUCT, COST OF ANY 
SUBSTITUTE PRODUCT, FACILITIES OR SERVICES OR CLAIMS OF CUSTOMERS FOR SUCH DAMAGES.

If there is any conflict between other sections of this appendix and the Limited Warranty, the terms of the Limited Warranty 
prevail.

Содержание 8456923



































Отзывы: