4-2
A-61602 June 2013
Cleaning the rollers
1. Press the release button to open the scanner cover.
2. With a roller cleaning pad, wipe the feed roller from side to side.
Rotate the feed roller to clean the entire surface.
IMPORTANT: The roller cleaning pad contains sodium lauryl ether
sulfate which can cause eye irritation. Wash your
hands with soap and water after performing
maintenance procedures. Refer to the MSDS for more
information.
NOTE: For easier cleaning, you can remove the roller. See
“Replacing the feed roller assembly” later in this chapter.
3. Wipe the NFR rollers from side to side. Rotate the NFR rollers to
clean the entire surface.
NOTE: For easier cleaning of the NFR rollers, you may want to
order
Kodak ScanMate
i1120 Scanner Cleaning Swabs.
For ordering information see the section entitled, “Supplies
and consumables” later in this chapter. Dry the rollers with
a lint-free cloth.
