Kodak 4800 Series Скачать руководство пользователя | Manualshive

Страница: 2 / 78

background image

i

Reference Guide

WARRANTY

United States

Kodak warrants its printers (“P

RODUCT

”) to be free from defects in workmanship and materials for

a period of one year from the date of purchase.

Kodak reserves the right to make changes or improvements to Products, without incurring any
obligation to similarly alter Products previously purchased.

Buyer’s sole and exclusive rights pursuant to this Warranty shall be for the repair or replacement of
defective Product. Kodak specifically disclaims any and all other warranties, expressed or implied,
including but not limited to, implied warranties of merchantability and fitness for a particular
purpose. In no event shall Kodak be liable for any loss of profit or other commercial damages,
special, incidental or consequential damages, or any other damages or claims, whatsoever.

This Warranty gives Buyer specific legal rights, and Buyer may also have other rights that vary
from state to state.

This Warranty applies only to printers purchased from Kodak, or authorized Kodak distributors or
dealers. The intent of this Warranty is to repair or replace defective Products subjected to normal
wear and tear, when operated according to Kodak instructions.

This warranty does not cover damage to the Product resulting from the following:

· Accident or negligence.
· Unauthorized modification of the Product.
· Adverse environmental conditions.
· Service of the Product by other than a Kodak authorized service provider.
· Unauthorized or improper use, including but not limited to:

- Use in applications for which the Product was not designed.
- Using cartridges, ink, or media other than Kodak products.
- Lubricating any part of the printer.

Internationally: Contact your dealer or distributor for warranty information.

«
1
2
3
4
...
»

Содержание 4800 Series















































































Отзывы:

Нет отзывов

Похожие инструкции для 4800 Series

Бренд: TallyGenicom Страницы: 145

T2265 SprintPro

Бренд: Tally Страницы: 217

Бренд: TallyGenicom Страницы: 12

Бренд: Canon Страницы: 32

Saddle Finisher-AF2

Бренд: Canon Страницы: 244

mobile pro advance

Бренд: AM TECH Страницы: 16

Бренд: Star Страницы: 88

LaserPro X500 III-80Y

Бренд: GCC Technologies Страницы: 127

Бренд: Oki Страницы: 105

Expression Home XP-305

Бренд: Epson Страницы: 45

Бренд: Epson Страницы: 32

Expression Home XP-245

Бренд: Epson Страницы: 4

Expression Home XP-212

Бренд: Epson Страницы: 2

Expression Home XP-30

Бренд: Epson Страницы: 2

FX 1170 - B/W Dot-matrix Printer

Бренд: Epson Страницы: 8

Бренд: Epson Страницы: 4

FX-2180 - Impact Printer

Бренд: Epson Страницы: 104

Fast T-Jet 3 PLUS

Бренд: Epson Страницы: 135

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды