KOCOM KCV-T701SM, Руководство пользователя

Страница: 10 / 28

10
KIP-32G KIP-32G KIP-32G KIP-32G
KAM-D340
KLP-420
KC-S81M(D1)
KVS-A4P/A8P
UTP CAT5e 4Px1
UTP CAT5e 4Px1
DEVICE 1 DEVICE 2 DEVICE 3 DEVICE 4
2
8
8
4 4 4 4
2
HOUSE1
HOUSE2
CN1
LO
B_
IN
LO B_
OU
T
EX_
PO
W
ER
4 1
4 1
5
1
4 1
4 1
1 2
■System mode diagram
※ KLP-420 SYSTEM must be connected to CAM2 port of the monitor
Polarized
4wire
Maximum wiring distance : 100m (The IN-OUT wiring must be done)
(UTP CAT5e) *Refer to "Product wiring" below for cable wiring
KC-S81M(D1)
KC-S81M(D1)
KIP-32G KIP-32G KIP-32G KIP-32G
UTP CAT5e 4Px1
UTP CAT5e 4Px1
Non-Polarized
Door Opener
UTP CAT5e 4Px1
DEVICE 1 DEVICE 2 DEVICE 3 DEVICE 4
Non-Polarized
UTP CAT5e 4Px1
UTP CATe 4Px1
ADAPTOR
KC-S81M(D1)
KIP-32G KIP-32G KIP-32G KIP-32G
Door Opener
ADAPTOR
Non-Polarized
DEVICE 1 DEVICE 2 DEVICE 3 DEVICE 4
CCTV
CCTV
CCTV
CCTV
8
2
2
2
4 4 4 4
■CCTV mode diagram
Product Wiring Diagram
Maximum wiring distance : 100m(D1(0.41M) Camera, IN-OUT wiring must be done.)
50m(2M Camera, IN-OUT wiring must be done.)
(UTP CAT5e) *Refer to "Product wiring" below for cable wiring
Coaxial cable should be used for CCTV connection.
■ Terminal
A. CAMERA 1
① CA1 VCC
② CA1 GND
③ CA1 AUDIO
④ CA1 VIDEO
C. INTERPHONE
① INTER VCC
② INTER GND
③ INTER AUDIO
④ INTER SIGNAL
B. CAMERA2 &
420 SYSTEM
① CA2 VCC
② CA2 GND
③ CA2 AUDIO
④ CA2 VIDEO
D. DOOR
① 12V
② GND
③ DOOR NO
④ DOOR COM
⑤ DOOR NC
F. UPDATE
No use
E. INNER DATA
① DATA
② GND
G. DEBUG
No use
The monitor that is installed furthest from
the camera should be set to Last device.
And the rest other monitors except the one
chosen as "Last Device" must be set as "X".
When connecting CCTV, you MUST set "Last device" at "Setting" for those CCTV connected at the port either CAM1 or CAM2.
For instance, if all 4 monitors are connected with CCTV at CAM2 port, you MUST go to each monitor's "Setting" and then choose
"Last device" for CAM2 (How to go to "Setting": Home screen > Setting > Camera > Last device > CAM2 >"O")
The monitor that is installed furthest from
the camera should be set to Last device.
And the rest other monitors except the one
chosen as "Last Device" must be set as "X".
※ When using the 420 system, the door open contact
in the monitor should not be used. Only the door open
contactin the outdoor camera should be used.