![KOCASO Flash II Скачать руководство пользователя страница 5](http://html1.mh-extra.com/html/kocaso/flash-ii/flash-ii_user-manual_1982654005.webp)
-3-
1 Getting Started
1.1 Installing the SIM card, battery, and memory card
Remove the back cover before installing the SIM card and battery. Also, make
sure to always turn off the power before installing or replacing the SIM card and
battery.
To remove the battery
1. Make sure the device is powered off.
2. Remove the back cover.
3. The bottom of the phone has a notch. Lift the battery by the notch to remove.
To install the SIM card
The SIM card contains your phone number, service details, and phonebook/
message memory. This device supports 2G, 3G (WCDMA) SIM cards.
1. Remove the battery if installed.
2. Locate the SIM card slot, and then insert the SIM card with its gold contacts
facing down and its cut-off corner facing out the card slot.
3. Slide the SIM card completely into the slot.
Note: • The phone can support dual SIM cards. The card slot supports 3G
(WCDMA).
When 3G or 2G card inserted, you can only use 3G or 2G operation.
• Some legacy SIM cards may not function with your device. You should
consult with your service provider for a replacement SIM card. There may
be fees for this service.
To install a memory card
1. Make sure the device is turned off, then remove the back cover.
2. Locate the memory card slot on the upper part of the exposed right panel.
3. Insert the memory card into the slot with its gold contacts facing down until it
clicks into place.
Note: To remove the memory card, press in to eject it from the slot.
To install the battery