ZFC
ZFC K03/0522
page 7
6. Operation
This device may only be operated by persons who are authorized and
trained by the operator of the facility. All instructions in this manual are
to be observed.
Take careful notice of the "Safety rules, instructions and precautionary
measures" in the front of this manual.
This chapter describes the daily use of the ZFC. This instruction is meant for
users / operators.
6.1 Control panel
The control panel has three keys. The available keys are:
Control panel
Functions of the keys
This key is used to program and save new values or settings.
The PROG/ENTER key is also used to gain access to the setup menu
(read chapter 7).
This key is used to select the accumulated total and temperature.
The SELECT/
key is also used to increase a value after the
PROG/ENTER key has been pressed (read chapter 7).
This key is used to reset the total.
The CLEAR/
key is also used to select a digit or an option after the
PROG/ENTER key has been pressed (read chapter 7)
.
