ZFC
ZFC K03/0522
page 31
Active signal 8.2V, 12V and 24V:
If a sensor gives an active signal (read chapter 3). The detection levels are 50%
of the selected supply voltage; approx. 4V (8-1 DC) or 6V (12 DC) or 12V (24
DC). Active signal selection may well be desired in case of power supply type 3
is available for sensor supply.
Terminal connections - Active signal input (typical)
Reed-switch:
The ZFC is suitable for use with flowmeters which have a reed-switch. To avoid
pulse bounce from the reed-switch, it is advised to select REED LP - low-pass
filter (read chapter 7).
Terminal connections - Reed-switch signal input (typical)
+3V, +8,2V, +12V, +24V DC
