ZFC
page 6
ZFC K03/0522
Configuration
The ZFC is designed for use in many types of applications. For that reason, a
setup menu is available to program the ZFC according to your specific
requirements.
The setup includes several important features, such as K-Factors, engineering
units, signal selection, etc. All settings are stored in a non- volatile memory and
therefore kept in the event of a power failure.
Display information
The unit has a LCD with (optional) backlight to show the process information,
status and alarm messages. The display refresh rate is programmed in the setup
menu.
At a key press, the display refresh rate will switch to FAST for 30 seconds. When
'OFF' is selected, the display goes off after 30 seconds after the last key press.
The display temporarily comes on after a key press.
A backup of the total and accumulated total in EEPROM memory is made every
minute.
Backlight
A backlight is available as an option. The brightness can be tuned as desired.
Options
The following options are available: active (0)4-20 mA analog output, full
Modbus communication RS485, mechanical relay or active output, power- and
sensor-supply options, extended measurement range for PT100, wall-mount
and weather-proof enclosures and LED backlight.
