NEO 01/0820
Rev A
19
|
Configuration Using NEOCal Software
Step Three
With NEO-7 connected to your computer, open the NEOCal software by clicking on the software icon. Follow
steps 3-6 to configure the transmitter. Click “Help” in the lower right hand corner and open the help menu of
instructions on the NEOCal software.
STEP 3 - SENSOR CONFIGURATION:
Configures the Loop Fail-Safe, Output at Empty and Startup Condition for the sensor.
Note: When connecting the sensor to the NEOCal software, you must remove the display or the software will
not connect. Once completed, you can re-connect the display to the terminal.
Note: When configuring NEO-7, choose
either the NEOCal software or Push Button
method. Either method will accomplish the
goal of sensor configuration. Changes to
the configuration can be made using the
alternative method. When beginning with
one method, it is recommended to
complete the configuration before using the
other method to make any adjustments.
