HND-T205
page 8
HND-T205 K05/0422
Menu
Parameter Values
Meaning
key
Menu
key
key
or
p.r.t.
Set Configuration: Generic Settings
°C:
All temperature values are in degrees Celsius
*
°F:
All temperature values are in degrees Fahrenheit
0.1°:
Resolution 0.1 °C
*
7.6.1
0.01°:
Resolution 0.01 °C
Auto:
Resolution is selected automatically
E.751
Measuring / sensor curve according to EN60751
*
7.6.2
USEr
User sensor curve (Predefined to EN60751 values, changeable
by software)
-2.50 °C..2.50 °C
resp.
-4.50 °F...4.50 °F
The zero point of the measurement will be displaced by this value
to compensate for deviations in the probe or in the measuring
device.
*
7.6.3
oFF:
Zero displacement inactive (=0.0°)
-2.000...2.000:
The scale of the measuring will be changed by this factor (in %)
to compensate deviations of temperature probe or measuring
device
*
7.6.4
oFF:
Scale correction factor inactive (=0.000)
1...30:
Average filter (period in seconds)
7.6.5
oFF:
Average filter inactive
7.6.5
1...120
Power-off delay in minutes.
Device will be automatically switched off as soon as this time has
elapsed if no key is pressed/no interface communication takes
place
.
oFF
Power-off function inactive (continuous operation, e.g. mains
operation)
oFF:
Function of the output: No output function, lowest power
consumption
7.6.6
SEr:
Output is serial interface
dAC:
Output is analogue output 0...1 V
01,11..91
Base Address when Output = Serial Interface :
Base address of device for interface communication.
7.6.6
-200.0...850.0 °C
resp.
-328.0...1562.0 °F
Enter desired temperature value at which the analogue output
potential should be 0 V
7.6.6
-200.0...850.0 °C
resp.
-328.0...1562.0 °F
Enter desired temperature value at which the analogue output
potential should be 1 V
7.6.6
Set Alarm: Settings Of Alarm Function
on
Alarm on, with horn-sound
7.6.8
no.So
Alarm on, without horn-sound
oFF
no alarm function
min range
...AL.Hi
Min alarm rail (not when AL. oFF)
7-6.8
AL.Lo
...max range
Max alarm rail (not when AL. oFF)
7.6.8
Set Logger: Configuration Of Logger Function
*
CYCL
Cyclic: logger function ‚cyclic logger‘
*
7.8
Stor
Store: logger function ‚individual value logger‘
oFF
no logger function
0:01..60:00
Cycle time of cyclic logger [minutes:seconds]
*
7.8
