HND-F215
page 10
HND-F215 K07/0522
'Corr': Selection of Display Correction Factor *
1
1
.001...1.200
: The temperature value (referring to 0 °C or. 32 °F) will be
multiplied by this factor.
off
:
Factor is deactivated (=1.000)
'Power.off': Selection of Power-Off Delay
1...120
: Power-off delay in minutes. Device will be automatically switched off
as soon as this time has elapsed if no key is pressed/no interface
communication takes place. (deactivated when cyclic logger is
running)
off
:
automatic power-off function deactivated (continuous operation)
'Address': Selection of Base Address'
01, 11, 21, ..., 91
: Base address for interface communication.
Using the interface converter HND-Z031 it is possible to connect several devices to a
single interface. As a precondition the base addresses of all devices must not be
identical. In case several devices are connected via one interface make sure to
configurate the base addresses accordingly.
'Set Alarm': Alarm Settings
Settings for the alarm function:
Please note: the points marked by *2 will only be displayed if the alarm
functions 'on' or 'no'.So' have been selected.
'Alarm': Selection of Alarm Function
off
:
Alarm off
no.So
: Alarm on, the "AL" arrow will be displayed in case of alarm
on
:
Alarm on, in case of alarm the "AL" arrow will be displayed; in
addition an audible alarm signal will be given.
'Alarm Input': Selection of Alarm Input *
2
arrow points to the input channel
'Alarm Low': Setting of Min. Alarm *2
Setting of the display limit value triggering a min. alarm.
'Alarm High': Setting of Max. Alarm *2
Setting of the display limit value triggering a max . alarm
'Set Logger': Logger Settings
(not possible if there are data in the logger memory)
Setting for the logger function:
.
'Function': Selection of Logger Function
off
:
Logger function off (Use key 6 for Hold-function)
Stor
:
Individual value logger (Press key 6 to store an individual value set)
CYCL
: Cyclic logger (Start by pressing key 6)
note: if function "AVG Hold" is chosen, the cyclic logger is not supported.
