Kobold DVZ series, Руководство по эксплуатации

Страница: 18 / 31

DVZ
page 18 DVZ K04/0810
Wetted parts
Sensor housing: PPS, fibreglass-reinforced
Sensor: PVDF
Connections: brass (from 32 L/min nickel plated
from 40 L/min blank) or
stainless steel 1.4404
Bluff body: PPS, fibreglass-reinforced or
oxide ceramic (non-wear version)
Seal: NBR, EPDM or FPM
DVZ-...S300, DVZ-…S30D
Display: duo-LED for switching condition
and when range limit is exceeded
Switching output: relay changeover, max. 1 A/30 V
DC
or active 24 V
DC
, N/C / N/O
Switch point: measuring range beginning from 90% f.s.
in 10%-steps
can be configured by the customer using a
rotary switch
Power supply: 24 V
DC
± 20%
Power consumption: 12 mA
Electrical connection: plug M12x1.5 pole
Measuring range overflow: flash of the DUO-LED (red/green)
from 105 % of f.s.
DVZ-...F300, DVZ-…F390
Impulse output: PNP, Open Collector, max. 200 mA
Frequency at f.s. 500 Hz (…F300)
50…1000 Hz (F390)
Power supply: 24 V
DC
± 20%
Power consumption: 5 mA
Electrical connection: plug M12x1
Measuring range overflow: F
out
approx. 2 kHz from 105 % of f.s.
DVZ-...L303; DVZ-...L343
Output: 0(4)-20 mA, 3-wire
Max. load: 500 Ω
Power supply: 24 V
DC
± 20%
Electrical connection: plug M12x1
Measuring range overflow: I
out
approx. 20,5 mA from 103 % of f.s.
DVZ-...L443 (usage with AUF-3000)
Output: 4-20 mA, 3-wire
Max. load: 500 Ω
Power supply: 24 V
DC
± 20%
Electrical connection: plug DIN 43650
Measuring range overflow: I
out
approx. 20,5 mA from 103 % of f.s.