・
S mode: For standard excavating work
・
ECO mode: For low fuel consumption
excavating work
・
H mode: For heavy duty excavating work
"S mode" is suitable for standard digging and
loading works and is in saving fuel consumption
and is in good balance to the workload.
"Eco mode" is the mode focusing on better
fuel economy, allowing for normal digging
operation with lower fuel consumption than S
mode.
"H mode" is suitable for heavy duty digging
work which gives priority to the workload at
the high speed.
The logic is, when the fuel consumption value
is 90 % or less of the fuel consumption value
of relief operation at H mode, the green mark
turns on (common logic in each mode).
21
(3) Screen selection by work mode select switch
The mode after the engine starting is always the start from "S" mode. The work mode is switched in
order of "S" to "E" to "H" to "S" each time the work mode select switch is pressed.
Select proper work mode shown below according to the work condition and the purpose. For the
selected work mode, refer to the upper left corner of display.
S mode
ECO mode
H mode
(4) Condition for turning the green mark on
［
21. MECHATRO CONTROLLER
］
21-29
Copyright © 2015 Kobelco Construction Machinery Co.,Ltd. All rights reserved. [S5YN0046E03] [0109CsCshWbYs]