background image

22 

 

 

 

DISCLAIMER 

 

1) 

CAREFULLY  INSPECT  ALL  ITEMS  FOR  DAMAGES  BEFORE  ACCEPTING  DELIVERY.  

NOTE  ANY  DAMAGES  ON  THE  FREIGHT  BILL  OR  EXPRESS  RECEIPT,  REQUEST 

SIGNATURE OF THE CARRIER’S AGENT AND KEEP COPY TO SUPPORT YOUR CLAIM. 

Upon acceptance by the carrier he/she assumes responsibility for its safe arrival.  Damages 

should be reported to carrier and a claim filed.  Failure to do this could result in the carrier 

refusing to honor your claim.  The carrier will furnish you with necessary forms for filing a 

claim.

 

DAMAGES CAUSED DURING TRANSIT ARE NOT COVERED UNDER OUR WARRANTY

 

2) 

PLEASE INSPECT CONTENTS OF PACKAGE (S) CAREFULLY UPON RECEIVING! 

We must be notified in writing of any damages and/or missing parts within the allocated days 

upon receipt of package(s)

.

  Contact your local KOBE dealer or distributor or call KOBE for 

the time limit. 

CLAIMS WILL NOT BE ACCEPTED AFTER THE ALLOCATED DAYS.

 

NOTE: This item was thoroughly tested and carefully packed in our factory.

 

 

3)  Products  must  be  returned  in  good  working  condition  with  ALL  original  parts  & 

documentation packed in ALL

 

original cartons, fillers & shipping cartons.  A restocking fee 

of 25% (may be different at time of return) will be charged for all returned items with any 

missing parts or documentation.

 

EXCHANGES OR RETURNS MAY NOT BE ACCEPTED IF ANY PACKAGING IS MISSING.

 

 

4) 

BE  SURE  TO  INSPECT  THE  HOOD  FOR  DAMAGES  AND  DEFECTS  BEFORE 
INSTALLATION.   

Appearance  flaws  of  the  hood  found  after  installation  and  not  affecting 

hood performance is not covered under our warranty for returns or exchanges.

 

 Service visits 

not covered under warranty will carry a service charge.

 

YOUR CLAIM FOR CONCEALED DAMAGE MUST BE REPORTED WITHIN FIFTEEN (15) 

DAYS OF DELIVERY.  YOU MUST BE ABLE TO PROVE UNIT WAS DAMAGED WHEN YOU 

RECEIVED IT.

 

 

A)  Before Installation:  Return for exchange or refund (please see above for acceptable 

returns). 

 

B)  After Installation: 

NO

 exchange or refund. 

 

 

 

 

 

 

 

 

 

 

 

 

 

Содержание CH-178

























Отзывы: