background image

 

- OPERATING INSTRUCTIONS - 

 

 

KOBE range hood motors can be operated independently of one another. 

 

This KOBE range hood model is operated by two 2-speed switches located on the front of the 

hood.  Each switch controls a separate motor with high and low settings.  (Fig. 4)  The low 

setting will handle most exhaust requirements while the high speed should be used for heavier 

cooking. 

 

The light switch is located to the right of the control switches.  (Fig. 4)  NOTE:  Before replacing 

light bulb, turn off range hood.  See section on Changing the Light Bulb.  DO NOT uses more 

than 12V 20W halogen light (CH-178 Series).  

 

If your range hood is equipped with the QuietMode™ feature, the LED indicator switch will be 

located to the right of the light switch.  When the QuietMode™ switch is turned on, the LED 

indicator will be lit and both fans will change into QuietMode™ regardless whether one or both 

fans were on.  When QuietMode™ is switched off; the previous controls will take effect.  

Remember to turn off control switches after you are finished. 

 

The QuietMode™ feature offers continuous ventilation at a greatly reduced noise level. 

 

 

                           

Left Motor Switch

         

Right Motor Switch          Lights        Quiet Mode (LED) Light 

                        

                                                          

 

 

                                                        

(CH-178

 

Switch)    

                                                                 (Fig. 4)

 

 

 

 

 

- MAINTENANCE OF THE HOOD - 

 

 

----SAFETY WARNING---- 

INTERIOR OF HOOD MAY HAVE VERY SHARP EDGES, PLEASE 

WEAR  PROTECTIVE  GLOVES  IF  YOU  HAVE  TO  OPEN  THE 

HOOD FOR CLEANING OR SERVICING. 

 

 

 

 

Содержание CH-178

























Отзывы: