background image

THREE-YEAR LIMITED WARRANTY

13

1. Flush the tool with air-tool oil or gum 

    solvent.

2. Lubricate the tool.

3. Adjust the regulator on the tool to 

    maximum setting.

    Adjust the compressor regulator to tool 

    maximum of 90 PSI.

4. Tighten and seal hose fittings if leaks are 

    found. Use sealing tape.

5. Be sure the hose is the proper size. 

    Long hose or tools using large volumes 

    of air may require a hose with an I.D. of 

    1/2 in. or larger depending on the total

    length of the hoses.

    Do not use a multiple number of hoses 

    connected together with quick-connect 

    fittings. This causes additional pressure 

    drops and reduces the tool power. 

    Directly connect the hoses together.

6. Replace rotor blade.

7. Water in tank; drain tank. (See air 

    compressor manual). Oil tool and run 

    until no water is evident. Oil tool again 

    and run 1-2 seconds.

Tool runs 

slowly or will 

not operate

1. Grit or gum in tool.

2. No oil in tool.

3. Low air pressure.

4. Air hose leaks.

5. Pressure drops.

6. Worn rotor blade.

7. Moisture blowing 

    out of tool exhaust.

PROBLEM

TROUBLESHOOTING

                     CORRECTIVE ACTION

POSSIBLE CAUSE

This tool is warranted by the manufacturer to the original purchaser from the original 

purchase date for three (3) years subject to the warranty coverage described herein.

This tool is warranted to the original user to be free from defect in material and 

workmanship. If you believe that a tool is defective, return the tool, with proper proof 

of purchase to the point of purchase. If it is determined that the tool is defective and 

covered by this warranty, the distributor will replace the tool or refund the 

purchase price.

This warranty is void if: defects in materials or workmanship or damages result from 

repairs or alterations which have been made or attempted by others or the 

unauthorized use of nonconforming parts; the damage is due to normal wear, 

damage is due to abuse (including overloading of the tool beyond capacity), improper 

maintenance, neglect or accident; or the damage is due to the use of the tool after 

partial failure or use with improper accessories or unauthorized repair or alteration.

This warranty gives you specific legal rights, and you may also have other rights that 

vary from state to state.

For warranty questions, call our customer service department at 1-888-3KOBALT,

8:00 a.m.-8:00 p.m. EST, Monday-Friday.

Содержание SGY-AIR141















Отзывы: